Guides
Shelving and spur systems
Two product lines under one collection: twin-slot wall systems with uprights and brackets, or cut-to-size MFC shelf boards only. Choose the line that matches the install.
- Made in Bolton since 1998
- Free UK mainland delivery
- Constructionline Gold
- SSIP accredited
- Trade prices exc VAT
Bridgewater Direct sells shelving as two separate made-to-measure lines. One is a complete twin-slot wall system. The other is shelf boards only — cut and edged MFC for alcoves, cupboards and replacement shelves. Base and wall cabinets are a different product and are covered in the vanity and cabinets guide.
Spur systems and shelf boards are both made to measure in Bolton on a 2–4 working days lead time. Fixings are advised on enquiry for your substrate — we do not publish a standard fixing specification. No product warranty is stated for spur uprights or brackets.
What we supply
-
Twin-slot wall-mounted shelving
Made-to-measure wall system with twin-slot steel uprights in a white finish and 18mm MFC shelves. Configure width, height, depth and shelf count. Panels are capped at 2400mm and split automatically for manufacture and handling. Shelf boards are limited to 2750mm maximum length per piece.
Configure spur shelving -
18mm MFC shelf boards
Shelf boards only — melamine-faced 18mm MFC, cut to size with selectable edge banding (1 long, 2 long, 1 short, 2 short, or all four). Edging is charged per metre; the configurator defaults to one long edge. Maximum single shelf length 2750mm. Use for alcoves, cupboard interiors, airing cupboards, utility rooms and replacement shelves. Instant on-screen price from a cut list.
Order shelf boards -
Full MFC panels
Where you need full sheets or larger panels rather than narrow shelves, order cut-to-size MFC panels instead of the shelf-board SKU.
Cut-to-size MFC -
Base and wall cabinets
Carcass storage is a separate configurator. Use EasyCab when you need base, wall, corner or tall units rather than open spur shelves.
Cabinet configurator
How to choose
| Need | Product |
|---|---|
| Complete wall system (uprights + adjustable shelves) | Twin Slot Wall-Mounted Shelving |
| Boards only onto existing bearings or cupboard rails | Shelves — 18mm MFC |
| Full panels, not narrow shelves | MFC cut-to-size panels |
| Enclosed carcass storage | Base and wall cabinets |
Do not treat spur shelving as an HTM 63 product. HTM 63 on this site is a joinery and worktop specification — see What is NHS HTM 63.
Why buy direct from the manufacturer
-
Cut to the opening
Shelf widths and depths are cut in Bolton to the sizes you enter, so alcove and cupboard fills are made once rather than trimmed on site.
-
Two clear product lines
System or boards-only — you are not buying a mixed kit with parts you do not need.
-
Same factory as the washroom package
Shelving can ship with cubicles, IPS and worktops from one manufacturer when the project needs storage as well as the washroom run.
Common questions
Do I need the twin-slot system or just shelf boards?
Order the twin-slot product when you need uprights and brackets as well as shelves. Order shelf boards when bearings, cupboard rails or an existing spur system are already on the wall.
What does the 50kg per shelf figure mean?
Shelf loading of up to 50kg evenly distributed is a general guide based on typical twin-slot systems, not a tested rating. Actual capacity depends on upright spacing, bracket depth, fixings and substrate. Specify for your own application and contact us if you need guidance.
Are shelf boards edged on all sides?
Yes — we can edge all four edges, or any combination of long and short edges. Edging is charged per metre, and the configurator defaults to one long edge. Maximum single shelf length is 2750mm.
What colours are available?
The twin-slot product describes a large range of Fundermax decors for the MFC shelves. Confirm available decors on the product configurator before you lock a scheme.
Related guides
Get shelving priced from your sizes
Enter widths and depths on the product page, or send a cut list for shelf boards. Spur systems and shelf boards are both 2–4 working days.