Headrail
Stainless Steel Angle Headrail 40 x 17 x 1.2mm – 3m
Code T960S
Not yet available to order online while we check its fit details.
Not sure which fitting you need?
Send us a photo of the fitting from both sides with a ruler in shot, and tell us the measured panel thickness. We’ll check it against the supplier’s drawing before you buy.
Specification
What arrives
The exact contents of this part haven’t been confirmed online yet. Ask us before ordering.
About this part
What it is
A 3m satin stainless steel angle headrail, 40 x 17 x 1.2mm.
What it fits
Profile drawing being confirmed.
What's included
1 x 3m length.
Dimensions
40 x 17 x 1.2mm, 3m.
Fixing instructions
Fixing guidance and drawings will be added here. Ask us if you need them before ordering.
Delivery
Long-length item. It is supplied full length and is not cut down for courier delivery. Please contact us for a delivery quote, or to arrange collection, before ordering.
Related parts
Headrail fixings.
Part code: T960S. Manufactured by Access Hardware; supplied by Bridgewater Direct.
Measuring and identifying a fitting
Most fittings look alike in a catalogue photo. Send us clear photos and a few measurements and we’ll check which part fits before you order. If it’s not something we can supply, we’ll say so.
- Photograph the fitting on the door from both sides, with a ruler or tape measure in the shot.
- Photograph the panel edge so we can see its thickness, and tell us what it measures.
- Send them to us on WhatsApp, or email them with your order number if it’s a repeat order.
Ordering before you’re sure? Choose “Not sure” on any part with options and we’ll point you here instead of adding a guess to your basket.
What to measure
- Actual board thickness Measure the panel edge in millimetres. Nominal and actual thickness can differ, so give us the measured figure.
- Hole centres Measure from the centre of one fixing hole to the centre of the next, in millimetres.
- Fixing positions Measure from the top, bottom or edge of the door to the fitting, so a replacement lines up with the existing holes.
- Door opening direction Does the door open into the cubicle (inward) or out of it (outward)? Locks, keeps and buffers differ between the two.
- Handing, and where you stood Tell us which side the hinges are on and whether you were standing inside or outside the cubicle. Makers describe handing differently, so we check it against the supplier’s drawing for you.
- Not sure? That’s fine. Send the photos anyway and we’ll work it out with you.
Questions about this part
How do I know this part fits my cubicles?
Compare the board thickness, door opening and dimensions in the specification with your panels, measured in millimetres. If anything doesn't match, or you can't measure it, send us photos of the fitting from both sides with a ruler in shot and we'll check before you order.
What does a quantity of 1 get me?
One of the selling unit shown beside the price: each, pair, set or pack. "What arrives" lists exactly what is in it.
Are fixings included?
Only if "What arrives" lists them. If they aren't included, use fixings suited to your panel material and thickness. Ask us if you're not sure.
How do I tell left hand from right hand?
Makers describe handing differently, so tell us which side the hinges are on and whether you were standing inside or outside the cubicle. We'll check it against the supplier's drawing for you.
I'm buying new Bridgewater cubicles. Do I need this?
No. Complete cubicles are supplied with their hardware. Parts here are for repairs, replacements and spares.